SAMx update (last edited: 3-Jul-08) 
	===================================

The updated files are to be installed over the
	version which was distributed on SAMx CDROM 8.8 to 8.12


XMAS Updated files (3-Jul-08)
---------------------------------
	Files updated:
		xm_pea.dll.......(version 16.9)
		xm_mspec.dll.....(version 16.9)
		xmas_st.exe......(version 14.2)
		ShowPk.exe.......(version 8.4)
		xm_comp.dll......(version 12.23)
		xm_std.exe.......(version 7.5)
		xm_search.dll....(version 1.2)
		xm_quali.exe.....(version 7.1)
		xm_lib.dll.......(version 5.3)
		xmgrf.ocx........(version 1.2)
		xm_micro.dll.....(version 5.26)
		xm_acq.exe.......(version 8.19)
		xm_xl.dll........(version 2.0)
		xm_picox.dll.....(version 2.6)
		xm_lsacq.exe.....(version 4.8)
		xm_import.dll....(version 2.60)
		xm_sinus.dll.....(version 3.3)
	Description:
		Remove temporary test on spectrometer movement on Mash ( fix in 16.9)
		The Mash stage didn't work anymore (fix with 16.8)
		Add a 20msec delay after the status command
		Change scheme when reading the counters in the Mash system
		Add a delay before starting the counters in Standalone (Pk-Bg)
		Correct crystal switch for Mash
		Improve peak search
		Load Slit posiiton twice on Microspec at the end of peak search
		Fix a bug when calculating off-line analysis in XMAS of EDS data only
		Add a "?" button in the WDS Acquisition (Standard) to search for possible Spectrometer position
		Correct crystal change in Mash configuration
		Correct crash of Spectrum Processing in the label function
		Change background of cursor in Spectrum Processing
		Correct a few items for Microspec
		Display Stage scan as position if one axis scan 
otherwise by point number
		Correct random crash of live spectrum display
		Reduce timeout for Mash driver
		Correct Stage Line scan, use actual stage position to display the spectrum
		Correct setting of current when multiconditions are used
		Extend the number of elements in the standard from 25 to 28
		Correct import of SX100 files
		The statistic calculation is now working properly.
		The peak search uses the maximum if too few channels are above the noise
		Standalone now has a way to measure Peak to Background
		Standalone support 5 stage axes
		Hard code the LIF crystal for Microspec in LineScan
		Correct communication with PHA for Mash
		Add sinus & XL drivers
		Forcing the XTal change of the existing Xtal in standalone only in Mash
		The Mash driver was compiled in Debug mode and didn't access the hardware
		Correct wrong call to Jeol External DLL
		Correct statistic calculation, the range was sometime wrong
		Force Xtal even if the Xtal is already in place Mash.

IDFix Updated files (04-Mar-08)
---------------------------------
	Files updated:
		xm_qtx.dll.....(version 23.7)
		xm_lib.dll.....(version 5.2)
		xm_numerix.dll.(version 14.3)
		IDFix.exe......(version 8.2)
	
	Description:
		Correct display of individual fit
		Correct EMSA import, don't save the spectrum offset
		Support different NumeriX clock frequency (TimeFactor)
		The error display is not the Chi2 of the deconvolution
		Speed up the communication with the NumeriX box
		Correct display of deconvolute spectrum of identify elements
		Add a few downloaded files to the NumeriX box
		Correct background calculation when actual calculated concentrations is used



HiMax Updated files (03-Mar-08)
---------------------------------
	Files updated:
		HiMax.exe.......(version 9.18)
		xm_batch.exe....(version 6.02)
	
	Description:
		Correct HiMax acquisition in Batch mode




MaxView Updated files (1-Feb-08)
---------------------------------
	Files updated:
		MaxView.exe.....(version 8.10)
		Mv_data.dll.....(version 6.0)
		xm_xlacq.exe......(version 3.1)
	
	Description:
		Correct the Particle Analysis program when use with 
			quantitative images.
		Correct regular Xray map when L or M lines were used
		Correct the crash of combination of images
		Remove error message when starting an XL acquisition
		The magnification was not read correctly